Water pump Chevy SBC SHORT Neck pump 327 350 400 Aluminium Victor Series Small Block Chev

Edelbrock #8010 water pump for 1955-68 SBC passenger cars,

1969-70 350 c.i.d, Corvettes and 1955-72 Light duty Trucks.

Edelbrock #8010 water pump for 1955-68 SBC passenger cars, 1969-70 350 c.i.d, Corvettes and 1955-72 Light duty Trucks. Provides maximum cooling form the street and the race track. Water pump provide maximum flow, maximum pressure and equal distribution to both sides of the block with 1%.

Thermostat And Housing Included           No

Thermostat And Housing Included           No

Mounting Hole Quantity               4

Housing Material              Aluminum

Impeller Material             Powdered Metal

Installation Warnings      Yes

Hub Hole Quantity           6

Fan Clutch Included        No

Impeller Vane Quantity 6

Includes Back Housing   Yes

Related Cooling Fan Components             No

Casting Number               8810

Warranty             12 Months

Hub Height         5.625 in

Impeller Rotation             Standard

Outlet Quantity 1

Pulley Included No

Water Pump Drive Type                V-Belt

Installation Notes           

1969-'76 vehicles (original pump casting #3853692) require the included spacer to be placed between the pump and the alternator bracket; Some applications (original pump casting #364790) require power steering bracket spacer (included); Some vehicles (original pump casting #6263701) require a through hole instead of the threaded hole for the power steering. If this is the case, drill out the threads with a 3/8" drill bit; Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications; Installation is the same as for original equipment water pumps. Consult service manual for specific procedures, if necessary; CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing; NOTE: Removal of backing plate is not recommended, as there are no user serviceable parts in the water pump. If backing plate is removed, use no sealer on O-ring equipped models, and use conventional gasket sealer (not RTV silicone) on gasketed models.