BBC Chevy Intake Inlet Manifold Dual Plane Manifold Performer RPM AIR GAP Satin, Big Block Chevy

Edelbrock RPM Air-Gap 2-O Intake Manifold for Chevrolet 396-502 Big-Block V8.

Edelbrock part #7561 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. This RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. No provision for exhaust heated chokes and no exhaust crossover.

Series    RPM Air-Gap

Grade Type        Performance

Gasket Or Seal Included                No

Ec Basic Operating Rpm Range   1500-6500 RPM

Center Maximum Height              5.220 in

CNC Ported        No

Finish    Satin

Front Maximum Height 4.450 in

Material               Aluminum

Rear Maximum Height   6.000 in

Single Or Dual Plane Type             Dual

Installation Notes           

Recommended intake gasket: Edelbrock #7203; Manifold height: A-4.45", B-6.0"; Carb pad height: 5.22"; Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket #8031 for 1972-78.; Port exit dimensions: 1.60" x 1.94"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.