large range of high performance pushrods.

Total Performance stocks a large range of high performance pushrods.

PUSHRODS

Pushrods under load at high engine speed wobble and flex. With high spring pressures, pushrods can deflect and throw off the valve timing, leading to poor valvetrain stability, valve timing, or consistent power and in many cases, lifter failure. Increasing the diameter and wall thickness of the pushrods makes them stronger and stiffer, and more stable. Makes much more sense to have a more stable valvetrain, dont skimp on pushrods. 

Reliability & Failures:    Many pushrod and lifter wheel failures can be traced back to poor valvetrain stability. Its a must in performance applications to use a High quality, Chromemoly pushrods. Use the largest pushrod diameter possible that still provides the necessary clearance in the cylinder head and rocker body. You can also use a thicker wall pushrod to achieve the needed results. An incorrectly used pushrod is under load, they flex much like a pole vaulter's pole. Which allows the lifter to leave the camshaft lobe in the quick ramps. The lifter is then smacked by the rotating lobe which damages the lifter and failure is imminent. Rocker Arm flex is also a factor in valvetrain stability. 

Power:   As power becomes flat or decreases due to “valvetrain stability,” the biggest culprit is often the pushrod deflection. In tests conducted by a prominent cam manufacturer, they claim to have found 12 hp on a SBC with a 204/214 @ .050 cam (.420/.443 valve lift) just by going from a .065˝ wall stock pushrod to a .080˝ wall pushrod, and the springs were only 110 lbs. on the seat and 245 lbs. open

Materials:    Most OEM pushrods feature low-carbon steel tubes and ends. Some manufactures use a mild performance 1010 Carbon. Total Performance recommends the use of a high quality Chromemoly.  



$30.80

or 4 payments of $7.70 with Info

Not yet rated
$38.15

or 4 payments of $9.54 with Info

Not yet rated
SKU: 7754-16

6.400" Long, .080" Wall, 5/16" Diameter Hi-Tech Pushrods Set -suits Retor fit Ford W

Common for 302 Windsor Hydraulic Roller Retro-Fit

$368.34

or 4 payments of $92.08 with Info

Not yet rated
SKU: CROW-PR-948-16

6.900" Long, Pushrods, Superduty .080" Wall, 5/16" Diameter, suits 302W Windsor Flat

Common for 302w Windsor Flat Tappet set ups. Superduty

$225.50

or 4 payments of $56.38 with Info

Not yet rated
SKU: CROW-PR-956-16

7.350" Long, .080" Wall, 5/16" MINUS -050" Shorter Pushrods LS1 LS2 LS3 LENGTH

-050" Shorter Super Duty Series

$211.63

or 4 payments of $52.91 with Info

Not yet rated
$211.63

or 4 payments of $52.91 with Info

Not yet rated
SKU: 7955-16

7.400" Long Pushrods, .080" Wall, 5/16" Diameter Hardened Pushrods Hi-Tech (LS1 LS2

Premium Quality - Standard LS1 LS2 LS3 length.

$361.72

or 4 payments of $90.43 with Info

Not yet rated
SKU: 7796-16

7.425" Long Pushrods, LS1 LS2 LS3 +.025" Ball / Ball, Hi-Tech, 5/16" Diameter, Harden

Premium Quality - +.025" longer than standard LS length

$351.68

or 4 payments of $87.92 with Info

Not yet rated
SKU: CROW-PR-937-16

7.800" Long .080" Wall, 5/16" Diameter Pushrods Set Chevy 350 Super Duty Series

Super Duty Series - Chevy 350 standard Length

$225.50

or 4 payments of $56.38 with Info

Not yet rated
$438.92

or 4 payments of $109.73 with Info

Not yet rated
$295.25

or 4 payments of $73.81 with Info

Not yet rated
$297.28

or 4 payments of $74.32 with Info

Not yet rated
$199.76

or 4 payments of $49.94 with Info

Not yet rated
$282.29

or 4 payments of $70.57 with Info

Not yet rated
$424.55

or 4 payments of $106.14 with Info

Not yet rated
$264.48

or 4 payments of $66.12 with Info

Not yet rated
$288.17

or 4 payments of $72.04 with Info

Not yet rated
$334.42

or 4 payments of $83.61 with Info

Not yet rated
$331.07

or 4 payments of $82.77 with Info

Not yet rated
$321.56

or 4 payments of $80.39 with Info

Not yet rated
$313.62

or 4 payments of $78.41 with Info

Not yet rated
$351.55

or 4 payments of $87.89 with Info

Not yet rated
$373.37

or 4 payments of $93.34 with Info

Not yet rated
$370.08

or 4 payments of $92.52 with Info

Not yet rated
$333.59

or 4 payments of $83.40 with Info

Not yet rated
$17.82

or 4 payments of $4.46 with Info

Not yet rated
$393.73

or 4 payments of $98.43 with Info

Not yet rated
SKU: 7781-16

7781-16 Hi-Tech 8.900" Long, .080" Wall, 5/16" Diameter Pushrods Holden Solid Flat Ta

Normal Holden V8 Carby Head/ Solid Flat Tappet length.

$359.28

or 4 payments of $89.82 with Info

Not yet rated
$373.37

or 4 payments of $93.34 with Info

Not yet rated
$285.27

or 4 payments of $71.32 with Info

Not yet rated
$307.73

or 4 payments of $76.93 with Info

Not yet rated
$307.73

or 4 payments of $76.93 with Info

Not yet rated
$351.68

or 4 payments of $87.92 with Info

Not yet rated
$53.31

or 4 payments of $13.33 with Info

Not yet rated
$81.21

or 4 payments of $20.30 with Info

Not yet rated
$32.75

or 4 payments of $8.19 with Info

Not yet rated