Filter By Guide Plate Compatible
- Yes
- No
Filter By Pushrod Series
- Super Duty
- Straight .165" Wall
- Next Gen
- Magnum
- High Energy
- Hi-Tech Oil Restricting One-Piece
- Hi-Tech 210 Degree Radius
- Hi-Tech .135 Wall
- Hi-Tech .105" Wall
- Hi-Tech
- Dual Taper .165" Wall
Filter By Top Tip Type
- Precision Formed Ball
Filter By Bottom Tip Type
- Precision Formed Ball
Filter By Grade Type
- Performance
Filter By Oiling Type
- Oiling
Filter By Material
- Chromemoly Steel
Filter By Finish Type
- Black Oxide
Filter By Length
- 9.954
- 9.95
- 9.9
- 9.85
- 9.8
- 9.75
- 9.748
- 9.7
- 9.677
- 9.668
- 9.654
- 9.65
- 9.647
- 9.621
- 9.600
- 9.6
- 9.56
- 9.55
- 9.547
- 9.500
- 9.5
- 9.45
- 9.44
- 9.4
- 9.378
- 9.35
- 9.315
- 9.3
- 9.252
- 9.25
- 9.2
- 9.15
- 9.146
- 9.13
- 9.1
- 9.05
- 9
- 8.95
- 8.903
- 8.9
- 8.85
- 8.8
- 8.78
- 8.75
- 8.7
- 8.684
- 8.68
- 8.65
- 8.616
- 8.600
- 8.6
- 8.575
- 8.55
- 8.500
- 8.5
- 8.492
- 8.450
- 8.45
- 8.425
- 8.412
- 8.400
- 8.4
- 8.38
- 8.375
- 8.35
- 8.325
- 8.3
- 8.280 - Intake 9.252 - Exhaust
- 8.28
- 8.275
- 8.25
- 8.234
- 8.225
- 8.212
- 8.2
- 8.175
- 8.152
- 8.15
- 8.125
Filter By Adjustment Range
- 8.160 to 8.392
Filter By Exhaust Rod Length
- 8.15
Filter By Price Range
- $100 or below
- $100 to $200
- $200 to $300
- $300 to $400
- $400 or above
Filter By Brand
- COMP CAMS
- CROW CAMS
- DRP
- MELLING
large range of high performance pushrods.
Total Performance stocks a large range of high performance pushrods.
PUSHRODS
Pushrods under load at high engine speed wobble and flex. With high spring pressures, pushrods can deflect and throw off the valve timing, leading to poor valvetrain stability, valve timing, or consistent power and in many cases, lifter failure. Increasing the diameter and wall thickness of the pushrods makes them stronger and stiffer, and more stable. Makes much more sense to have a more stable valvetrain, dont skimp on pushrods.
Reliability & Failures: Many pushrod and lifter wheel failures can be traced back to poor valvetrain stability. Its a must in performance applications to use a High quality, Chromemoly pushrods. Use the largest pushrod diameter possible that still provides the necessary clearance in the cylinder head and rocker body. You can also use a thicker wall pushrod to achieve the needed results. An incorrectly used pushrod is under load, they flex much like a pole vaulter's pole. Which allows the lifter to leave the camshaft lobe in the quick ramps. The lifter is then smacked by the rotating lobe which damages the lifter and failure is imminent. Rocker Arm flex is also a factor in valvetrain stability.
Power: As power becomes flat or decreases due to “valvetrain stability,” the biggest culprit is often the pushrod deflection. In tests conducted by a prominent cam manufacturer, they claim to have found 12 hp on a SBC with a 204/214 @ .050 cam (.420/.443 valve lift) just by going from a .065˝ wall stock pushrod to a .080˝ wall pushrod, and the springs were only 110 lbs. on the seat and 245 lbs. open
Materials: Most OEM pushrods feature low-carbon steel tubes and ends. Some manufactures use a mild performance 1010 Carbon. Total Performance recommends the use of a high quality Chromemoly.
High Energy 8.412" Long, 5/16" Diameter Pushrods Set - Ford 351C Cleveland Standard Replac
Standard Replacement Pushrods - Not Hardened
Holden 253 308 V8 Pushrods Set - not hardened High Energy 8.684" Long, 5/16" Diameter Pont
Standard Holden V8 253 308
LS Pushrods Hi-Tech 7.300" Long, .080" Wall, 5/16" LS2 LS3 LS6 -.100" Shorter th
-.100" Shorter than standard LS length
LS Pushrods Hi-Tech Oil Restricting 7.400" Long, .080" Wall, 5/16" LS2 LS3 LS6 STANDA
Competition - Oil Restricting - High RPM
Pushrods 6.400" Long, 5/16" Diameter .110" Wall, 210 Radius set of 16, 302 Windsor Re
Common for 302 Windsor Hydraulic Roller RETRO-FIT.
Pushrods 6.800" Long, Ford 302W Windsor .080" Wall, 5/16" (Hydraulic Flat Tappet) Su
Suits 302W - Hydraulic Flat Tappet
PUSHRODS 7.900" Long, .138" Wall, 3/8" Diameter 210 Radius - Chevy 350 +.100"
Superduty 7.050" Long, .080" Wall, 5/16" Pushrods (12) Holden V6 3800 ECOTEC L67 (Fa
Superduty Series Thin Wall
Superduty 8.400" Long, .080" Wall, 5/16" Pushrods (16) Ford 351 Cleveland Flat Tappe
Superduty Series
7994-16 Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrods Set 16
Street/Strip - High Quality - Hardened.
7.400" Long, .110" Wall, 210 Radius, 5/16" Diameter Pushrods Set LS1 LS2 LS6 LENGTH
Standard LS length - 210 Radius ends.
