SRT HELLCAT Hydraulic Roller Lifters Drop In, full Set for Chrysler GEN 3 HEMI 5.7L 6.4L, JEEP, RAM

The best way to delete MDS on an MDS GEN 3 HEMI, upgrade to the NON-MDS 

DRP Lifters are made in the USA.

• Standard Travel - 0.143"
• "Drop in" OEM upgrade replacement (not tie bar)
• Pre-Load Recommended: .035"  +/- .010"
• Sold as a set of 16 
• No trays/Yokes included - Lifters only. 
• **These lifters will typically require different pushrods lengths than stock

These Hydraulic lifters feature:
- Cold forged steel body heat treated for exceptional wear resistance.
- Precision ground needle roller bearing with high chromium steel axle for long life and minimal friction.
- Cold forged extra long piston, precision ground and fitted for controlled leak down and pump up.
- High flow disc style quick reacting check valve for better reaction at higher RPM.
- Precision oil metering assuring proper oiling to the rocker arms without sacrificing oil pressure.

Notes: 

If you currently have MDS (Cylinder Shut Down) and are upgrading to these non-mds lifters, you will need to fit the delete plugs and retune/calibrate to turn off the MDS. 

These lifters have the pushrod cup installed lower than the OEM and will need a longer pushrods.