Edelbrock, Performer, RPM, Camshaft, Engine, V8, Cam, Rollin Thunder, 2204, 283-400, 1987-Later, Non-LT1, Non-Gen III, Chevy

Edelbrock Rollin' Thunder Camshaft #2204

Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 435HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813 and Performer RPM E-Tec cylinder heads #60795. Use with high stall torque converter and stock ratio rocker arms only.

Camshaft specifications:
Intake duration: 234 Degrees - Exhaust duration: 238 Degrees
Intake lift: .539" - Exhaust lift: .548"
Lobe separation: 112 Degree
Intake Center Line: 107
Degree - Vacuum: 12"