500HP HOLDEN 304 V8 EFI VN 355 Hydraulic Roller Camshaft 288HR 236/236 0.572"/0.572" LSA 108 COMP CAM - Best 355 stroker camshaft

Total Performance Custom Cam by COMP Cams Hydraulic Roller Camshaft fits Holden 304 / 5.0L V8 (suits VN EFI type Heads)

Dyno Proven 500 HP & 6800 RPM! See the Dyno sheet with DRP Proline Valve Springs.

This is an excellent all round camshaft for the 355 Stoker combinations. 

This COMP Cams hydraulic roller camshaft is Street friendly & agressive enough to pull hard to 6800 RPM! Designed for Holden 304 / 5.0L V8 engines with VN EFI cylinder heads. A very popular grind, it performs exceptionally well in 355 stroker builds, delivering strong midrange and top-end horsepower with crisp throttle response. This USA-made cam is an excellent choice for street and strip applications requiring power, durability, and proven performance.

Key Benefits

• Best Cam for the 355 strokers, Popular grind with excellent results.

• Rough idle with a performance lope

• Strong midrange and top-end power to 6600 rpm - revs to 6800 RPM

• Crisp throttle response for street/strip use

• COMP Cams quality, made in the USA

Recommended Setup

• Compression: 10.0 – 10.5:1

• Rear Gear Ratio: 3.5 – 3.9

• 3000 to 3500 High-stall torque converter recommended

• Ported / modified VN EFI heads for maximum gains + Machine for dual valve springs

• Valve Springs: Recommend DRP Streetline or DRP Proline valve Springs* Cylinder head machine work required.

  • DRP-8374S-16  - (Street) LS type Dual

  • DRP-8415P-16   (High RPM/Strip) LS type Dual polished

  • DRP-8415P-304KIT (High RPM KIT) LS type Dual Springs Polished

• 650 CFM Carby

Specs

• Engine Fitment: Holden 304 / 5.0L V8 (VN EFI heads)

• Cam Type: Hydraulic Roller

• Brand: Comp Cams 

• Part Number: 282-236236-HR-08

• Duration @ 0.050": 236 / 236

• Valve Lift @ 1.65:1: .570" / .570"

• Lobe Lift: .347" / .347"

• Lobe Separation Angle (LSA): 108

• Basic RPM Range: 3000 – 6500

COMP CAM - MADE IN USA

CAMSHAFT BY TOTAL PERFORMANCE