SBC Small Block Chevy 350 Heads, 23 deg Straight Plug, Assembled PAC springs, suit HYDRAULIC FLAT TAPPET

DRP SBC Chevy 350 Cylinder Heads  - STRAIGHT PLUG HEADS

Assembled Complete & suit Hydraulic Flat Tappet Camshafts

500HP and 460ft/lb of Torque from a 350 Small Block Chev*

Wow of a price for such a great Horsepower and Torque!!

*Dyno results are from a 350 Chev with a Solid Flat Tappet. 

Heads are assembled for HYDRAULIC FLAT TAPPET & includes:

      °DRP Cylinder Heads - Hand assembled by Total Performance (hand assembled in Melbourne) with PAC Racing Valve Springs

• Valve Springs: DRP Streetline by PAC Racing - LS Small Dual Springs
• Valve Springs Specs: 125lbs Seat & 276lbs Open @ 0.450" Lift.    
• Comp Cams - Retainers
• DRP Valves - 5000 Series valves

REQUIRES:

• Adjustable guide plates  - see listing part # DRP-4835-8 
• Rocker Studs  -  see listing part # ARP-100-7101 OR 4512-16 Comp Cams

These heads flow 530hp @ 0.550" lift

Flow Figures*:          

Lift          Intake          Exhaust

200          145             106

300          192             135

400          232             160

450          242             168   503hp

500          250             178   

550          257             179   530hp

600          261             181   537hp

650          260             187   

700          255             190

Please allow 5 days to assemble the heads. * If you need these sooner, just ask. 

* Results will vary depending on your build and combination of other items. 

This Dyno test was carried out with a Solid Flat Tappet Camshaft,255/256 Duration and 0.540/0.534" valve lift with a 106 LSA. 1 3/4 Headers, Electrical Water pump, Edelbrock Victor Jnr Single plane intake (we feel you will achieve similar results with an air gap dual plane. 11:1 Compression with a domed Piston. 34°

350 CHEVY DYNO RUN - 500HP  https://www.youtube.com/watch?v=vpwIgJIN5X8

383 CHEVY DYNO RUN - LOW COMP 95 OCTANE  https://www.youtube.com/watch?v=iAEie9M4fz8